Agilent RGC-100 and RGC-150 Rough Gauge Controllers
Category: Agilent / Varian
Specifications
SKU
RGC150
Details
Gauge Controllers
RGC-100 and RGC-150 Rough Gauge Controllers
Agilent’s rough gauge controllers are a cost-effective solution for pressure measurement in the 1 x 10-3 torr to 760 torr range. The RGC-100 and RGC-150 packages include the Thermocouple tube, sensor cables, and power supplies.
These vacuum gauge controllers are a perfect pre-calibrated, turnkey solution in a wide range of applications: general vacuum measurement in the rough vacuum range; monitoring forelines, chamber evacuation, and crossover to high vacuum pumps.
Features
These vacuum gauge controllers are a perfect pre-calibrated, turnkey solution in a wide range of applications: general vacuum measurement in the rough vacuum range; monitoring forelines, chamber evacuation, and crossover to high vacuum pumps.
| RGC150 | RGC-150 rough gauge controller |
| RGC150KF16 | RGC-150 rough gauge controller, 536 thermocouple gauge, KF16, rough vac controller |
| RGC150KF25 | RGC-150 rough gauge controller, 536 thermocouple gauge, KF25, rough vac controller |
| RGC150CF | RGC-150, 1.33in CFF TC, RGH VAC CONT |
| RGC150EKF16 | RGC-150 rough gauge controller, 536 thermocouple gauge, KF16, rough vac controller, ethernet |
| RGC150E | RGC-150 rough gauge controller, with ethernet and software |
| RGC150ECF | RGC-150, 1.33in CFF TC, RGH VAC CONT,ETH |
| RGC150EKF25 | RGC-150 rough gauge controller, 536 thermocouple gauge, KF25, rough vac controller, ethernet |
Features
- No calibration required at initial setup: Thermocouple gauge – Agilent 531 – and controller are pre-calibrated as a set at the factory.
- Globally compatible: runs on 100-230 VAC, 50/60 Hz and displays in Torr or mbar (as well as in kPa for RGC-150).
- Easily read from across a room, or in dimly lit locations: large bright LED display.
- Easily integrated (RGC-100): Optional set point control, analog output, RS232 communication.
- Monitor vacuum performance from a remote location (RGC-150): Optional Ethernet connection and software that allows for remote monitoring through a web browser.
Specifications
RGC-150 Rough Gauge Controller RGC-100 Rough Gauge Controller
RGC-150 Rough Gauge Controller Outline Drawing RGC-100 Rough Gauge Controller Outline Drawing
| Agilent RGC-100 Rough Gauge Controller Technical Specifications | ||
|---|---|---|
| Measurement range | 1.3 x 10-3 to 1000 mbar (1.0 x 10-3 to 760 Torr) | |
| Accuracy | % of reading | Units |
| ±10% | 1.3 x 10-3 to 1.3 mbar (1 milliTorr to 1 Torr) | |
| ±15% | 1.3 to 13.3 mbar (1 to 10 Torr) | |
| ±50% | 13.3 to 213 mbar (10 to 160 Torr) | |
| ±25% | 213 to 1000 mbar (160 Torr to 760 Torr) | |
| Vacuum fitting | ⅛ inch NPT-M | |
| Interface cable length | 10 ft. | |
| Sensor | Agilent 531 TC gauge tube | |
| Display | See below | |
| Dimensions | Mounts in 2.66 inch panel hole with 3 screws on 1.60 inch radius | |
| Supply voltage | 100-240 VAC, 50/60 Hz | |
| Standards | CE, ROHS compliant | |
| Optional setpoint controls | 7 A, 250 V | |
| Optional communication interface | RS-232 | |
| Optional analog output | 0-5 VDC | |
| Agilent RGC-150 Rough Gauge Controller Technical Specifications | ||
|---|---|---|
| Measurement range | 1.3 x 10-3 to 1000 mbar (1.0 x 10-3 to 760 Torr) | |
| Accuracy | % of reading | Units |
| ±10% | 1.3 x 10-3 to 1.3 mbar (1 milliTorr to 1 Torr) | |
| ±15% | 1.3 to 13.3 mbar (1 to 10 Torr) | |
| ±50% | 13.3 to 213 mbar (10 to 160 Torr) | |
| ±25% | 213 to 1000 mbar (160 Torr to 760 Torr) | |
| Vacuum fitting | ⅛ inch NPT-M | |
| Interface cable length | 10 ft. | |
| Sensor | See below | |
| Display | 0.38 inch high 6 digit red LED | |
| Dimensions | 1.7 inch high, 3.52 inch wide, 5.35 inch deep | |
| Analog output | 0-5 VDC | |
| Supply voltage | 100-240 VAC, 50/60 Hz | |
| Standards | CE, ROHS compliant | |
| Set point controls | 7 A, 250 V | |
| communication interface | RS-232 | |
| Mounting | ⅛ DIN rack mount | |
RGC-150 Rough Gauge Controller RGC-100 Rough Gauge Controller
RGC-150 Rough Gauge Controller Outline Drawing RGC-100 Rough Gauge Controller Outline Drawing
View more about Agilent RGC-100 and RGC-150 Rough Gauge Controllers on main site