Measuring Instruments Supplier Malaysia, Leak Detection Systems Supply Penang, Power Tools Supplies Singapore, Indonesia ~ Hexo Industries (M) Sdn Bhd

Category: MICSIG

SKU

RCP500

1. Flexible & slender clamp body, easy to measure;

2. Safe and convenient, no overload danger;

3. Bandwidth 15~300KHz, with max. current 500Apk;

4. Directly powered by Micsig UPI interface, no need extra power supply;

5. Can be powered by USB for non-UPI oscilloscopes;

Model	RCP500
Bandwidth	15-300KHz (-3dB)
Current range	200mApk-500Apk
Output Connector	Powered BNC / External BNC
Output Sensitivity	10mV/A
Typical Accuracy	1%
Phase Accuracy	≤0.8° (45Hz-66Hz)
Temperature Coefficient	Operating temp. range + 0.05 × Accuracy Specification /℃ (23℃±5℃）
Conductor Positional Accuracy	Within ±1% (Deviation from the Center)
Influence of External Magnetic Fields	1.5% f.s. or below (400A/m,50Hz/60Hz)
Offset Voltage	±1mV or below
Max Voltage	AC 10kV RMS (1 minute), (50Hz/60Hz) (Rogowski coil part only)
Output Impedance	High resistance
Output Noise	＜2mv rms
Conductor Under Test Diameter	≤Φ50mm
Power Supply	DC-5V
Coil to Integrator Cable Length	2m (customizable)
Integrator Dimensions	372282mm
Rogowski Coil Inner Diameter	50mm(customizable)
Rogowski Coil Thickness	Approx. φ6mm
Operating Temperature	-20-70℃
Storage Temperature	-30℃-70℃
Operating Humidity	Max 80%，no condensation
Operating Altitude	≤ 2000m
Operating Place	Indoor use, Pollution Degree 2.
Interface	Universal BNC

View more about Rogowski AC Current Probe RCP500 on main site